Rowlett Concrete Lifting logoRowlett Concrete LiftingRowlett, TX
Concrete Lifting Hero photo

Rowlett Concrete Lifting

Concrete Lifting in Rowlett, TX

Concrete lifting and leveling in Rowlett, TX — foam jacking, mudjacking, driveway and slab repair. Free estimates.

  • 15+ Years local experience
  • 500+ Projects completed
  • Licensed & Insured

Serving Rowlett and nearby communities.

Get a free estimate

Tell us about the project and how to reach you.

4.9 / 547 reviews on Google
15+Years local experience
500+Projects completed
Licensed & InsuredTX

Concrete Lifting

Mudjacking and foam concrete lifting for Rowlett homes

Is your driveway edge dropping while the rest of the slab looks fine? That's usually soil settling, not a sign the concrete itself failed.

Rowlett Concrete Lifting handles sunken driveways, patios, walkways, and pool decks without tearing anything out. We drill small injection ports, pump in foam or a soil-cement slurry, and raise the slab back to grade. Rowlett sits on Lake Ray Hubbard, and lots near the water see soil moisture swings that pull water out from under a slab, which is a common driver of the driveway and patio settling we see across town.

Concrete Lifting Intro photo

What we do

Concrete Lifting services

Concrete Lifting across Rowlett and the surrounding area.

Residential Services

Commercial Services

Why choose us

Why choose Rowlett Concrete Lifting

  • Written estimates before anything gets drilled

    You see the method and the price before a single injection port goes in the slab.

  • Method matched to the slab, not a one-size price

    Foam for lighter panels, slurry mud for heavier driveway sections, chosen on site.

  • Small holes, patched clean

    Injection ports run about 5/8 inch, then get capped and blended after the lift.

  • Straight talk on the cause

    Rowlett Concrete Lifting tells you why a slab sank before quoting the fix.

How it works

How our Concrete Lifting process works

  1. Site visit and slab assessment photo
    Step 1

    Site visit and slab inspection

    We check panel edges, gaps, and drainage before quoting anything.

  2. Method selection and plan photo
    Step 2

    Method selection

    Foam or mud slurry gets picked based on slab weight and location.

  3. Material injection photo
    Step 3

    Drilling injection ports

    Small ports go in at marked points across the settled panel.

  4. Lift and level check photo
    Step 4

    Lifting and leveling in stages

    Material pumps in slowly while we watch the slab rise flush.

  5. Height verification photo
    Step 5

    Sealing the ports

    Patch mortar caps each hole and blends with the surrounding concrete.

  6. Follow-up check photo
    Step 6

    Final grade check

    We confirm slope and drainage before calling the job finished.

Cost

Concrete Lifting Rowlett TX Cost

Price depends on slab size, how far it needs to lift, method, and how many injection ports the job takes. Here's a rough range: These are ballparks, not a quote. Contact us for a free estimate on your slab.

Project typeTypical rangeWhat’s included
Sidewalk or walkway panels$300–$800per panel, foam injection and patching.
Driveway sections$1,200–$4,000,mud or foam depending on panel weight.
Patio or pool deck$800–$3,500,includes slope correction near coping.
Garage floor$600–$2,500,single-visit interior lift.

These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.

Want a number for your home?

Get a Free Estimate

Materials

Materials and Methods We Use

  • Two-part polyurethane foam photo

    Closed-cell polyurethane foam

    Lightweight fill that expands fast and won't add weight that re-settles on lakefront moisture-swing soil.

  • Cementitious slurry mix photo

    Soil-cement slurry mix

    Traditional fill for heavier driveway panels where added mass helps hold the lift long term.

  • High-density structural foam photo

    Injection port hardware

    Small-diameter ports (about 5/8 inch) that leave a minimal footprint on the slab surface.

  • Flexible polyurethane crack sealant photo

    Patch/cap mortar

    Seals each port flush with the surrounding concrete after the lift is done.

  • Hydraulic cement sealant photo

    Drainage grading tools

    Used to check slope after leveling so water moves away from the house, not toward it.

  • Concrete patch compound photo

    High-density foam variant

    A denser foam blend for heavier driveway or garage slabs that need extra load support.

Timeline

How long does a Concrete Lifting take?

Most jobs move fast because the process is mechanical, not a demolition project.

  1. 01

    Inspection and quote

    same day
  2. 02

    Scheduling

  3. 03

    Lift and level

    1–3 hours
  4. 04

    Port sealing and cleanup

Need a schedule that fits?

Get a Free Estimate

Codes & permits

Permits, Codes, and Compliance

Requirements vary by jurisdiction. Confirm with the City of Rowlett before scheduling if you're unsure.

Typically needs a permitOften no permit
Foundation-adjacent flatwork tied to structural repairDriveway lifting as cosmetic repair
Work altering a public right-of-way sidewalkPatio releveling
Walkway panel lifting
Pool deck leveling
Garage floor leveling

DIY vs pro

DIY vs Hiring a Concrete Lifting Pro

DIYHire a pro
Sealing a hairline surface crack.Any job that needs the slab actually lifted.
Minor cosmetic patch work on a small chip.DIY foam kits often inject unevenly, which creates new voids under the slab instead of filling the old one.
Pro equipment controls lift pressure and depth panel by panel.

When to call

When to Call for Concrete Lifting

If any of these sound familiar, call Rowlett Concrete Lifting or request a free estimate.

  • A visible gap or void opening at a slab edge.
  • A trip lip forming at a doorway or sidewalk joint.
  • Water pooling toward the house instead of away from it.
  • A garage door that no longer seals flush at the floor.

Where we work

Serving Rowlett and nearby communities

Local pages for these communities. Nearby towns without a page are still in our service area.

Also serving

Garland · Sachse · Rockwall · Sunnyvale · Wylie · Murphy · and others

Service coverage Named cities have local pages · shaded areas are also served Rowlett, TX N Boundary data © OpenStreetMap contributors · ODbL
Named cities have local pages; shaded areas are also in our service area. Confirm availability for a specific address.

Before & after

  • Concrete Lifting in Rowlett, TX photo
    Before
  • Concrete Lifting in Rowlett, TX photo
    After

Customer feedback

What local customers say

  • Brian P.

    1 week ago

    5 out of 5 stars

    Called Rowlett Concrete Lifting after a neighbor tip in Rowlett. Super easy to deal with — clear answers, no runaround, and they actually cared about the details on our mudjacking / slab leveling.

    Rowlett, TX

  • Patricia V.

    3 weeks ago

    5 out of 5 stars

    Honestly did not expect such a professional team. They showed up on time, explained every step, and the sidewalk and walkway concrete repair turned out better than I pictured.

    Lakeside Estates, TX

  • Elizabeth K.

    3 days ago

    5 out of 5 stars

    Price was way more affordable than the other quotes we got for polyurethane foam jacking. Still felt premium — clean jobsite, solid finish, and I'd hire them again without thinking twice.

    Springfield, TX

Common questions

Concrete Lifting FAQs

Is mudjacking or foam better for a sunken driveway?

Foam works well on lighter panels and precise lifts, mud slurry suits larger driveway slabs that need more fill weight. We pick based on panel size and what's underneath.

Does homeowners insurance cover concrete lifting or slab settling?

Usually not. Most policies treat gradual soil settling as normal wear, not a covered event. Check your policy language, but budget for the repair as an out-of-pocket cost.

How much does slab jacking cost per square foot?

Foam typically runs higher per square foot than mud but uses less material and cures faster. Mud costs less per pound but you need more of it. Panel size and lift height matter more than a flat per-foot number.

How long does slab jacking last before it needs to be redone?

A properly lifted slab can hold for many years if the underlying soil moisture stays consistent. Repeat settling usually points to ongoing drainage or grading issues, not a failed lift.

How much does concrete lifting cost in Rowlett TX?

Most residential jobs run a few hundred dollars for a single walkway panel up to several thousand for a full driveway. Slab size, lift height, and method all move the number. A free estimate gets you an exact figure.

How long does concrete lifting take from start to finish?

Inspection and quote happen the same day. Most jobs schedule within a week and the actual lift takes one to three hours per slab section, done in a single visit.

Do I need a permit to lift a driveway or patio slab?

Most driveway, patio, and walkway lifting is cosmetic repair and doesn't need a permit. Work tied to a foundation or a public sidewalk sometimes does. We'll flag it if your job falls in that category.

Is DIY concrete leveling with polyurethane kits a bad idea?

Small kits can work for a hairline crack, but lifting a full panel needs even pressure across multiple points. Uneven DIY injection tends to create new voids instead of closing the old one.

Ready for a clear estimate?

Tell us about the project, or call to talk through options in Rowlett.

Call (254) 870-8251